|
| |
| Cincinnati Bickford Radial Drill
– 3’-0" Arm, 9" Col., T-base, Tilt table, Excellent conditon, SN 1R456 |
$4,500.00 |
| Cincinnati Horizontal Mill -
#4, SN 4A4P1J-19 |
$2,500.00 |
| Hercules Mill – 300U
Universal Head CVV 1500 M2758 |
$3,300.00 |
| Excello Mill – V-Speed,
Power feed, 9"x 36" Table, Good Condition |
$3,000.00 |
| Sunstrand Mill –
23’-0" Table, 36" Vertical, 21’-10" Horizontal, 50 hp, 10"
Spindle, 9" Travel, M50, Overarm, Auto oiler, Pendant Controls, Excellent condition
SN 35-109 |
$75,000.00 |
| Landis Cylinder Grinder –
12" X 36" LCH, Good Condition, SN 30124 |
$5,000.00 |
| TOS Gap Lathes – One (1)
20"X 28" Chippan, Two (2) 16"X 24" Chippan: Coolant, Steaty Rest,
Steaty follower, Taper Attactment, New (Still on original shipping skids. |
$12,500.00 (each) |
| LeBlond Sliding Bed –
25" X 50" X 18’-0" SN NH-1854 |
$20,000.00 |
| Bertsch Bending Rolls –
½" X 72" Capacity (MS), 9½"Round Top Roll, Pinch Type, SN 906M10430, New
1981, Excellent Condition |
$27,500.00 |
| Whiting Gantry Crane – 10
Ton, 28’-0" Span, 20’-0" Lift, 10’-0" Wheel Base, New 1974 |
$15,000.00 |
| Conco Bridge Crane – 5
Ton, Top Running, Double Girder, 37’-7" Span, 8’-2" Wheel Base,
50’-0" Lift |
$5,000.00 |
| C-Frame Press – 75 Ton,
25hp Miller Fluid Power Hyd. Unit, 8" Cylinder Rod, 32" Daylight,
21½"Throat |
$5,000.00 |
| Mazak VMC – V-10 Model
with lots of M45 tooling Two identical Machines |
$20,000.00 (for both) |
| G & L Hortizontal Mill
– 54" Vertical, 72" Cross, 90" Saddle, SN 5948 |
$15,000.00 |
If you are interested in any Equipment shown above, please e-mail us or
call us at:
PHONE: (270)278-2371 FAX: (270)278-2374
|
